document number: 94257 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 1 schottky rectifier, 2 x 40 a 80CPQ150PBF vishay high power products features ? 175 c t j operation ? center tap to-247 package ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ? guard ring for enhanced ruggedness and long term reliability ? lead (pb)-free (?pbf? suffix) ? designed and qualified for industrial level description the 80CPQ150PBF cent er tap schottky rectifier series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175 c junction temperature. typical applications are in switching power supplies, converters freewheeling diodes, and reverse battery protection. product summary i f(av) 2 x 40 a v r 150 v b as e common c a thode common c a thode 2 2 1 3 anode 1 anode 2 to-247ac available pb-free rohs* compliant major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 80 a v rrm 150 v i fsm t p = 5 s sine 1930 a v f 40 apk, t j = 125 c (per leg) 0.71 v t j - 55 to 175 c voltage ratings parameter symbol 80CPQ150PBF units maximum dc reverse voltage v r 150 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current see fig. 5 per leg i f(av) 50 % duty cycle at t c = 150 c, rectangular waveform 40 a per device 80 maximum peak one cycle non-repetitive surge current per leg see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 1930 10 ms sine or 6 ms rect. pulse 500 non-repetitive aval anche energy per leg e as t j = 25 c, i as = 1.0 a, l = 1 mh 0.5 mj repetitive avalanche current per leg i ar current decaying linearly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 1.0 a * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94257 2 revision: 13-aug-08 80CPQ150PBF vishay high power products schottky rectifier, 2 x 40 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions typ. max. units maximum forward voltage drop per leg see fig. 1 v fm (1) 40 a t j = 25 c 0.82 0.86 v 80 a 0.97 1.09 40 a t j = 125 c 0.67 0.71 80 a 0.80 0.85 maximum reverse leakage current per leg see fig. 2 i rm t j = 25 c v r = rated v r 10 200 a t j = 125 c 12 26 ma typical junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c - 1100 pf typical series inductance per leg l s measured lead to lead 5 mm from package body - 7.5 nh maximum voltage rate of change dv/dt rated v r - 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation see fig. 4 0.6 c/w maximum thermal resistance, junction to case per package dc operation 0.3 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.24 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style to-247ac (jedec) 80cpq150
document number: 94257 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 3 80CPQ150PBF schottky rectifier, 2 x 40 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacit ance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 1 100 10 1000 i f - instantaneous forward current (a) v fm - forward voltage drop (v) 0.5 1.0 1.5 2.0 2.5 3 .0 0 t j = 175 c t j = 125 c t j = 25 c 0.001 1 10 100 0.1 0.01 1000 i r - reverse current (ma) v r - reverse voltage (v) 40 20 60 8 0 160 100 120 140 0 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 100 1000 c t - junction capacitance (pf) v r - reverse voltage (v) 40 20 60 8 0 100 140 160 120 0 t j = 25 c 0.01 0.1 1.0 0.00001 0.0001 0.001 0.01 0.1 1.0 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) d = 0.75 d = 0.50 d = 0. 33 d = 0.25 d = 0.20 s ingle p u l s e (therm a l re s i s t a nce) p dm t 1 t 2 note s : 1. d u ty f a ctor d = t 1 /t 2 2. pe a k t j = p dm x z thjc + t c
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94257 4 revision: 13-aug-08 80CPQ150PBF vishay high power products schottky rectifier, 2 x 40 a fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) fig. 7 - maximum non-repetitive surge current (per leg) fig. 8 - unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r 120 1 3 0 150 170 1 8 0 160 140 allowable case temperature (c) i f(av) - average forward current (a) 20 10 3 040 50 60 0 dc s ee note (1) squa re w a ve (d = 0.50) 8 0 % r a ted v r a pplied 0 10 3 0 50 40 20 average power loss (w) i f(av) - average forward current (a) 20 10 3 040 50 60 0 dc rm s limit d = 0.20 d = 0.25 d = 0. 33 d = 0.50 d = 0.75 100 1000 10 000 i f s m - non-repetitive s urge current (a) t p - s quare wave pulse duration (s) 100 1000 10 000 10 at a ny r a ted lo a d condition a nd with r a ted v rrm a pplied following su rge current monitor high-speed switch d.u.t. r g = 25 + freewheel diode v d = 25 v l irfp460 40hfl40s02
document number: 94257 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 13-aug-08 5 80CPQ150PBF schottky rectifier, 2 x 40 a vishay high power products ordering information table 1 - current rating (80 = 80 a) 2 - circuit configuration: c = common cathode 3 - package: p = to-247 4 - schottky ?q? series 5 - voltage code (150 = 150 v) 6 - none = standard production pbf = lead (pb)-free tube standard pack quantity: 25 pieces device code 5 13 24 6 80 c p q 150 pbf links to related documents dimensions http://www.vishay.com/doc?95223 part marking information http://www.vishay.com/doc?95226
outline dimensions www.vishay.com vishay semiconductors revision: 16-jun-11 1 document number: 95223 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and inches notes (1) dimensioning and tolera ncing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish uncontrolled in l1 (6) ? p to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jede c outline to-247 with ex ception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 fk 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.37 0.065 0.094 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.86 0.015 0.034 ? p1 - 6.98 - 0.275 c1 0.38 0.76 0.015 0.030 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 1.78 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) ? p (datum b) fp1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) planting lead assignments diodes 1. - anode/open 2. - cathode 3. - anode
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
